Use the arrows to browse significant changes since the 3.1 version of this specification.
See 1 Introduction
Sections with significant changes are marked Δ in the table of contents.
See 1 Introduction
Setting the default namespace for elements and types to the special value ##any causes an unprefixed element name to act as a wildcard, matching by local name regardless of namespace.
See 3.2.7.2 Element Types
The terms FunctionType, ArrayType, MapType, and RecordType replace FunctionTest, ArrayTest, MapTest, and RecordTest, with no change in meaning.
See 3.2.8.1 Function Types
Record types are added as a new kind of ItemType, constraining the value space of maps.
See 3.2.8.3 Record Types
Function coercion now allows a function with arity N to be supplied where a function of arity greater than N is expected. For example this allows the function true#0 to be supplied where a predicate function is required.
See 3.4.4 Function Coercion
PR 1817 1853
An inline function may be annotated as a %method, giving it access to its containing map.
See 4.5.6 Inline Function Expressions
See 4.5.6.1 Methods
See 4.13.3 Lookup Expressions
The symbols × and ÷ can be used for multiplication and division.
See 4.8 Arithmetic Expressions
The rules for value comparisons when comparing values of different types (for example, decimal and double) have changed to be transitive. A decimal value is no longer converted to double, instead the double is converted to a decimal without loss of precision. This may affect compatibility in edge cases involving comparison of values that are numerically very close.
See 4.10.1 Value Comparisons
Operators such as < and > can use the full-width forms ＜ and ＞ to avoid the need for XML escaping.
See 4.10.2 General Comparisons
The lookup operator ? can now be followed by a string literal, for cases where map keys are strings other than NCNames. It can also be followed by a variable reference.
See 4.13.3 Lookup Expressions
PR 1864 1877
The key specifier can reference an item type or sequence type, to select values of that type only. This is especially useful when processing trees of maps and arrays, as encountered when processing JSON input.
See 4.13.3 Lookup Expressions
PR 1864 1877
The key specifier can reference an item type or sequence type, to select values of that type only. This is especially useful when processing trees of maps and arrays, as encountered when processing JSON input.
See 4.13.3 Lookup Expressions
The syntax on the right-hand side of an arrow operator has been relaxed; a dynamic function call no longer needs to start with a variable reference or a parenthesized expression, it can also be (for example) an inline function expression or a map or array constructor.
See 4.20 Arrow Expressions
The arrow operator => is now complemented by a “mapping arrow” operator =!> which applies the supplied function to each item in the input sequence independently.
See 4.20.2 Mapping Arrow Expressions
PR 1023 1128
It has been clarified that function coercion applies even when the supplied function item matches the required function type. This is to ensure that arguments supplied when calling the function are checked against the signature of the required function type, which might be stricter than the signature of the supplied function item.
See 3.4.4 Function Coercion
Parameter names may be included in a function signature; they are purely documentary.
See 3.2.8.1 Function Types
PR tba
Predicates in filter expressions for maps and arrays can now be numeric.
See 4.13.4 Filter Expressions for Maps and Arrays
The static typing feature has been dropped.
See 5 Conformance
The key specifier can reference an item type or sequence type, to select values of that type only. This is especially useful when processing trees of maps and arrays, as encountered when processing JSON input.
See 4.13.3 Lookup Expressions
The key specifier can reference an item type or sequence type, to select values of that type only. This is especially useful when processing trees of maps and arrays, as encountered when processing JSON input.
See 4.13.3 Lookup Expressions
The syntax record() is allowed; the only thing it matches is an empty map.
See 3.2.8.3 Record Types
The context value static type, which was there purely to assist in static typing, has been dropped.
See 2.2.1 Static Context
Four new axes have been defined: preceding-or-self, preceding-sibling-or-self, following-or-self, and following-sibling-or-self.
See 4.6.4.1 Axes
The syntax document-node(N), where N is a NameTestUnion, is introduced as an abbreviation for document-node(element(N)). For example, document-node(*) matches any well-formed XML document (as distinct from a document fragment).
See 3.2.7 Node Types
PR 28
Multiple for and let clauses can be combined in an expression without an intervening return keyword.
See 4.12.1 For Expressions
See 4.12.2 Let Expressions
PR 159
Keyword arguments are allowed on static function calls, as well as positional arguments.
See 4.5.1.1 Static Function Call Syntax
PR 202
The presentation of the rules for the subtype relationship between sequence types and item types has been substantially rewritten to improve clarity; no change to the semantics is intended.
See 3.3 Subtype Relationships
PR 230
The rules for “errors and optimization” have been tightened up to disallow many cases of optimizations that alter error behavior. In particular there are restrictions on reordering the operands of and and or, and of predicates in filter expressions, in a way that might allow the processor to raise dynamic errors that the author intended to prevent.
See 2.4.5 Guarded Expressions
PR 254
The term "function conversion rules" used in 3.1 has been replaced by the term "coercion rules".
See 3.4 Coercion Rules
The coercion rules allow “relabeling” of a supplied atomic item where the required type is a derived atomic type: for example, it is now permitted to supply the value 3 when calling a function that expects an instance of xs:positiveInteger.
See 3.4 Coercion Rules
PR 284
Alternative syntax for conditional expressions is available: if (condition) { X }.
See 4.14 Conditional Expressions
PR 286
Element and attribute tests can include alternative names: element(chapter|section), attribute(role|class).
See 3.2.7 Node Types
The NodeTest in an AxisStep now allows alternatives: ancestor::(section|appendix)
See 3.2.7 Node Types
Element and attribute tests of the form element(N) and attribute(N) now allow N to be any NameTest, including a wildcard.
See 3.2.7.2 Element Types
See 3.2.7.3 Attribute Types
PR 324
String templates provide a new way of constructing strings: for example `{$greeting}, {$planet}!` is equivalent to $greeting || ', ' || $planet || '!'
See 4.9.2 String Templates
PR 326
Support for higher-order functions is now a mandatory feature (in 3.1 it was optional).
See 5 Conformance
PR 344
A for member clause is added to FLWOR expressions to allow iteration over an array.
See 4.12.1 For Expressions
PR 368
The concept of the context item has been generalized, so it is now a context value. That is, it is no longer constrained to be a single item.
See 2.2.2 Dynamic Context
PR 433
Numeric literals can now be written in hexadecimal or binary notation; and underscores can be included for readability.
See 4.2.1.1 Numeric Literals
PR 519
The rules for tokenization have been largely rewritten. In some cases the revised specification may affect edge cases that were handled in different ways by different 3.1 processors, which could lead to incompatible behavior.
See A.3 Lexical structure
PR 521
New abbreviated syntax is introduced (focus function) for simple inline functions taking a single argument. An example is fn { ../@code }
See 4.5.6 Inline Function Expressions
PR 603
The rules for reporting type errors during static analysis have been changed so that a processor has more freedom to report errors in respect of constructs that are evidently wrong, such as @price/@value, even though dynamic evaluation is defined to return an empty sequence rather than an error.
See 2.4.6 Implausible Expressions
See 4.6.4.3 Implausible Axis Steps
PR 606
Element and attribute tests of the form element(A|B) and attribute(A|B) are now allowed.
See 3.2.7.2 Element Types
See 3.2.7.3 Attribute Types
PR 691
Enumeration types are added as a new kind of ItemType, constraining the value space of strings.
See 3.2.6 Enumeration Types
PR 728
The syntax record(*) is allowed; it matches any map.
See 3.2.8.3 Record Types
PR 815
The coercion rules now allow conversion in either direction between xs:hexBinary and xs:base64Binary.
See 3.4 Coercion Rules
PR 837
A deep lookup operator ?? is provided for searching trees of maps and arrays.
See 4.13.3 Lookup Expressions
PR 911
The coercion rules now allow any numeric type to be implicitly converted to any other, for example an xs:double is accepted where the required type is xs:double.
See 3.4 Coercion Rules
PR 996
The value of a predicate in a filter expression can now be a sequence of integers.
See 4.4 Filter Expressions
PR 1031
An otherwise operator is introduced: A otherwise B returns the value of A, unless it is an empty sequence, in which case it returns the value of B.
See 4.15 Otherwise Expressions
PR 1071
In map constructors, the keyword map is now optional, so map { 0: false(), 1: true() } can now be written { 0: false(), 1: true() }, provided it is used in a context where this creates no ambiguity.
See 4.13.1.1 Map Constructors
PR 1125
Lookup expressions can now take a modifier (such as keys, values, or pairs) enabling them to return structured results rather than a flattened sequence.
See 4.13.3 Lookup Expressions
PR 1131
A positional variable can be defined in a for expression.
See 4.12.1 For Expressions
The type of a variable used in a for expression can be declared.
See 4.12.1 For Expressions
The type of a variable used in a let expression can be declared.
See 4.12.2 Let Expressions
PR 1132
Choice item types (an item type allowing a set of alternative item types) are introduced.
See 3.2.5 Choice Item Types
PR 1163
Filter expressions for maps and arrays are introduced.
See 4.13.4 Filter Expressions for Maps and Arrays
PR 1181
The default namespace for elements and types can be set to the value ##any, allowing unprefixed names in axis steps to match elements with a given local name in any namespace.
See 2.2.1 Static Context
If the default namespace for elements and types has the special value ##any, then an unprefixed name in a NameTest acts as a wildcard, matching names in any namespace or none.
See 4.6.4.2 Node Tests
PR 1197
The keyword fn is allowed as a synonym for function in function types, to align with changes to inline function declarations.
See 3.2.8.1 Function Types
In inline function expressions, the keyword function may be abbreviated as fn.
See 4.5.6 Inline Function Expressions
PR 1212
XPath 3.0 included empty-sequence and item as reserved function names, and XPath 3.1 added map and array. This was unnecessary since these names never appear followed by a left parenthesis at the start of an expression. They have therefore been removed from the list. New keywords introducing item types, such as record and enum, have not been included in the list.
See A.4 Reserved Function Names
PR 1249
A for key/value clause is added to FLWOR expressions to allow iteration over maps.
See 4.12.1 For Expressions
PR 1250
Several decimal format properties, including minus sign, exponent separator, percent, and per-mille, can now be rendered as arbitrary strings rather than being confined to a single character.
See 2.2.1.2 Decimal Formats
PR 1265
The rules regarding the document-uri property of nodes returned by the fn:collection function have been relaxed.
See 2.2.2 Dynamic Context
PR 1344
Parts of the static context that were there purely to assist in static typing, such as the statically known documents, were no longer referenced and have therefore been dropped.
See 2.2.1 Static Context
The static typing option has been dropped.
See 2.3 Processing Model
PR 1361
The term atomic value has been replaced by atomic item.
See 2.1.2 Values
PR 1384
If a type declaration is present, the supplied values in the input sequence are now coerced to the required type. Type declarations are now permitted in XPath as well as XQuery.
See 4.16 Quantified Expressions
PR 1498
The EBNF operators ++ and ** have been introduced, for more concise representation of sequences using a character such as "," as a separator. The notation is borrowed from Invisible XML.
See 2.1 Terminology
The EBNF notation has been extended to allow the constructs (A ++ ",") (one or more occurrences of A, comma-separated, and (A ** ",") (zero or more occurrences of A, comma-separated.
See 2.1.1 Grammar Notation
The EBNF operators ++ and ** have been introduced, for more concise representation of sequences using a character such as "," as a separator. The notation is borrowed from Invisible XML.
See A.1 EBNF
See A.1.1 Notation
PR 1686
With the pipeline operator ->, the result of an expression can be bound to the context value before evaluating another expression.
See 4.18 Pipeline operator
PR 1703
Ordered maps are introduced.
See 4.13.1 Maps
The order of key-value pairs in the map constructor is now retained in the constructed map.
See 4.13.1.1 Map Constructors